Earthquake Walk Behind String Mower, 160cc Viper 4-Cycle Engine See pictures for details.
Tools metabo nt50 ae2 nailer in case good for house or site work note that this nailer has been used meaning it has scratches, dinks, and wear in general use pictures as reference but other than that this nailer is ready for more nailing action message if any questions or concerns
Tools Master force 208-5019 air screw nailer good for nailing at home or at work note that this tool is pre owned meaning it has wear but other than that its ready for some more nail slinging action message if any questions or concerns
Craftsmen CMCN618 V20 Cordless 18 Gauge Brad Nailer w/ 4 Ah Battery & Charger This nailer comes with one 20v 4Ah BAttery and a charger. It is in excellent condition and it has been tested. About this item Drives adhesive collated 18 GA finish nails with this cordless finish nailer ELIMINATES THE NEED: Fully cordless design eliminates the need for compressors, hoses or costly gas cartridges CLIMATE CONDITIONS: Provides consistent firing power in various climate conditions and materials CONSISTENT RESULTS: Tool-free depth settings for quick set up IMPROVED EFFICIENCY: Tool-free jam and stall settings for ease of use OPTIMAL BALANCE: Lightweight with optimal center of gravity providing optimal balance and comfort in hand during use DDED COMFORT: Contoured over-molded handle CONVENIENCE: Belt hook for added access and storage
Snap On Cooling System Tester Svt262-23 with Case. Made In U.S.A. SNAP ON TOOLS USA # SVTS 262-1 COOLING SYSTEM PRESSURE TESTER Item is in good used condition in case. *The dial has some scratches and is very cloudy. There are scuffs rust and signs of wear. See Pictures. If you have any questions please reach out. Thanks for looking
Hilti TE-56 Combi-Hammer Drill This hammer drill has some scuffs and scrapes and some paint splatter. See Pictures. Power consumption: 1100 W Maximum idle speed: 480rpm Maximum idle speed without hammer action: 720rpm Rated voltage: 120V Maximum impact energy: 7J Max. drilling capacity (in wood): 32 mm Max. drilling capacity (metal): 20 mm Max. drilling capacity (stone): 40 mm Max. drilling capacity (concrete): 40mm Max. drilling capacity (concrete - Bur): 66 mm Max. drilling capacity (hollow crown): 90mm
Atlas Copco LSV19 S120-1 Angle Die Grinders + RVM08B Pneumatic Scaler This set is in good condition and works well. There are some scrapes and scratches due to normal use. SEE PICTURES. Includes: 3) Atlas Copco LSV19 S120-1 Angle Die Grinder 1) Atlas Copco RVM08B Pneumatic Scaler Atlas Copco LSV19 S120-1 Features High speed (up to 20000RPM) Integrated speed controlled governor Compact and robust design Lightweight and easy-to-handle design Secure collet system Lever equipped with the safety clutch Benefits Optimal process speed for many applications High productivity Long-lasting performance and reliability Excellent operator comfort and accessibility Minimum sound levels Atlas Copco RVM08B Features Outstanding power-to-weight ratio Unique vibration damping system (RVM08) Clean-blowing device (RVM08 and RRC13B/N) Lightweight robust alloy casing Quick-change retainer Benefits Highest productivity for its size Long service intervals Reduced risk of vibration related injuries Easy-to-change chisel Minimum sound levels
Milwaukee 2962-20 M18 FUEL™ 1/2" Mid-Torque Impact Wrench TOOL ONLY See pictures for details
Tools Snap on eect200 small Loc: Z6 The Snap-On is a cord-free circuit tester designed for quick detection of DC voltage in automotive applications, such as cars, trucks, and motorcycles Purpose: Quickly detects DC voltage in automotive applications like cars, trucks, and motorcycles. Voltage Range: Operates within a 3-24V DC range. Cord-Free Operation: Utilizes a black carbon-infused contact area. The user probes the circuit and touches the carbon area with a free hand to establish a ground connection through their body. Indicators: Provides both an audible beep and a bright white LED light to signal the presence of DC voltage. Computer Safe: Designed to be computer safe with a current rating of less than 28mA, according to Snap-on Store . Design: Features a patented mini-Instinct® handle and a short stainless steel shank for easy access in tight spaces. It also includes a pocket clip for convenience and a safety tip-protector. Do Not Use: It's crucial to remember that this tester should not be used on AC voltage or airbags , according to Snap-on Store . Other Features: The EECT200 is also described as being lightweight, durable, and easy to use. It has a clear handle for visibility and the ability to test circuits in a faster and more convenient manner.
Mac Tools AW480Q 1/2" Pneumatic Impact Wrench Please note, the tool shows visible signs of use such as scratches and scuffs, but these cosmetic imperfections do not affect its performance. Features: Powerful 1/2" drive impact wrench Durable and reliable for heavy-duty use Low noise operation Ideal for automotive and industrial applications Condition: Used with cosmetic wear (scratches and scuffs)
MAC TOOLS 1/4" DRIVE MINI AIR RATCHET AR275Q 320 RPM This tool has been used and has signs of wear. See Pictures.
Snap On TL 936 Socket Ratchet 1/4" Drive Long Handle 6.5" USA This ratchet is in good condition. There are some scratches and signs of wear due to normal use.
Klein ET120 Combustible Gas Leak Detector Item has been used and tested. shows minor signs of usage. No damage on item and comes with soft case. The ET120 is it the perfect choice for HVAC professionals. It is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm. It features two levels of sensitivity depending on users' needs: High (approximately 50 to 1000 ppm) and Low (approximately 1,000 to 10,000 ppm). Detection range: Approximately 50 to 10,000 ppm* (*based on Methane) Two levels of sensitivity: High (approximately 50 to 1000 ppm) and Low (approximately 1000 to 10,000 ppm) Five red LED's (visual) and 85dB audible alerts that increase with gas concentration Automatic zero-point calibration at power-up (lights will flash during self-calibration; this does not indicate the presence of gas) 18-Inch flexible gooseneck expands sensor's reach; clips onto meter for storage Over-molded body for comfortable grip Auto power-off after 10 minutes of non-usage conserves battery life Specifications: Special Features: Audible Alert, Auto-Power Off, Visual Notification Batteries: 4 x AAA Display: Digital Included: Batteries, Carrying Pouch Overall Length: 28.31'' (71.9 cm) Overall Height: 2.75'' (7 cm) Overall Width: 1.78'' (4.5 cm) Weight: 13.00 oz (380.0 g)
Klein CL810 AC/DC/Auto Ranging Digital Auto Ranging AMP Clamp Multi Meter Item has been lightly used, comes with bag, all wiring. tested and has no issues. ready to be used with no signs of heavy usage. Brand-Klein Measurement Category-CAT IV Form Factor-Handheld Test/Measurement Functions-AC Current, AC Voltage, DC Current, DC Voltage, Frequency (Hz) Features-Auto-Ranging, Battery Door Access, Clamp, Data Hold, True RMS Display-Digital
Milwaukee 1680-20 Super Hawg 120V Drill Preowned Item The Milwaukee 1680-20 1/2" Super Hawg sets a new standard in power and efficiency for wood frame construction drilling. Outfitted with a powerful 13.0-amp motor, it provides steady performance with speeds ranging from 450 to 1,750 RPM. Its Roto-Lok handle allows 90-degree adjustments, offering versatile handling and comfort in challenging drilling positions. A reinforced nylon resin casing offers durability and lightweight operation, reducing user fatigue.
Snap-On 1/4" Drive Dual 80 Technology Soft Grip Round Swivel Head Ratchet THNF72 This swivel head ratchet is preowned. Its has some signs of wear and scratches due to normal use. • Dual 80 Technology features a 72-tooth gear to provide 5° of swing arc • Swivel head allows ratchet to be used as a ratcheting nut driver • Adjustable yoke screw allows the head to be tightened into a fixed position • Soft grip handle for user comfort • Soft Grip Replacement Handle (TH936-12) • Six teeth in contact with gear to provide strength and durability • Up to 25% less ratcheting arc to engage the next gear tooth • Sealed head helps keep dirt and other contaminants out of the head mechanism
Snap-On 1/2" Drive 24" Soft Grip Handle Breaker Bar SHBB24 This breaker bar is preowned in good. There are some signs of wear. The handle has chips and scratches. Features • Soft grip handle provides additional comfort and improves control • Longer-length handle increases leverage, making it easier to break stubborn fasteners loose • Overall Length 24"
Snap-on 25-1/2 Inch Soft Grip Long Handle Ratchet Flex-Head 1/2" Drive This ratchet is prowned in good condition. There are some signs of wear due to normal use The Snap-on 25-1/2 Inch Soft Grip Long Handle Ratchet Flex-Head is a high-quality hand tool designed for automotive use. Made in the United States, this single item features a 1/2 inch drive size and no quick release feature. With a durable construction and a comfortable grip, this long handle ratchet is a reliable option for professionals and enthusiasts alike. The Snap-on brand is known for its top-notch products, making this a valuable addition to any tool collection.
• 8,000 RPM handles most grinding jobs with ease • Ultra-slim head allows user to access areas other grinders cannot • Battery rotates 270° for improved access • Takes 4-1/2" or 5" wheels—more options to get the job done fast • Anti-vibration handle allows user to work longer and more comfortably • Replaceable motor screen keeps debris out of the motor so tool lasts longer • Seven-position safety guard lets user tackle most jobs with less effort • Tool-free guard removal—simply pull one guard off and slide the other one on Comes with battery
Milwaukee 2630-20 M18 6-1/2" Cordless Circular Saw w/ Battery & Charger Preowned Item M18 6½" Circular Saw is designed to provide you with powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing, and carpentry. The cordless circular saw is a high-performance tool that delivers the most durability in a cordless saw. It has a powerful 3, 500 RPM motor letting you quickly and easily cut through tough material such as LVL headers.
SNAP-ON QD1R200 DRIVE FLEX HEAD TORQUE WRENCH See pictures for details.
